MTR 2000 Repeater
Contents:
- Programming cable
- Backplane Connectors
- STM32 DVM MTR2K Manual Version V2.0C
- Repeater Builder Library
- Firmware Update
- The Repeater Builder MTR2000 Information Page
[Top][Home]
Programming cable
The pinout of the programming cable for the MTR-2000 repeater should be as follows:
Computer RPTR
DB9 RJ-45
2 --------------- 3
3 --------------- 2
5 --------------- 4
[Top][Home]
Backplane Connectors
Backplane Connectors:
http://batlabs.com/mtr2000.html
[Top][Home]
STM32 DVM MTR2K Manual Version V2.0C
STM32-DVM-MTR2K_V2.0C_Manual_20191217.pdf
Source:
http://ks-dmr.net/wp-content/uploads/2019/09/STM32-DVM-MTR2K-Manual.pdf
[Top][Home]
Repeater Builder Library
https://www.repeater-builder.com/motorola/mtr2k/mtr-index.html
[Top][Home]
Firmware Update
:
https://wiki.m17project.org/stm32-dvm-mtr2k
[Top][Home]
The Repeater Builder MTR2000 Information Page
RB_STM32_DVM for the Motorola MTR2000 Repeater:
https://www.repeater-builder.com/products/stm32-dvm_MTR2k.html
[Top][Home]
Glenn Lyons VK4PK
glenn@LyonsComputer.com.au
Ver:gnl2021 - pre published v0.9