Connect to the onboard Pharos application to setup the CPE.
Default Settings
IP address: 192.168.0.254
Username: admin
Passowrd: admin
The default setting can be recovered by holding the reset on either the transceiver or the POE injector for 8 seconds or more.
The reset button on the injecot is a great bonus when the transceiver is mounted on a tower and is inaccessable.
Note that when changing the network to a different address you MUST login again
at the new address and SAVE the setting or the unit will return to the original
address on power cycling.
Note The 710 is quoting 867Mbps throughput and the 510 300Mbps. I was disappointed when I learned that the 710 hs a gigabit LAN interface and the 510 a 100 megabit LAN interface making a mockery of the 300 Mbps throughput.
