- r2cloud Tracking Software
- Antenna Actuators
- ISS Slow Scan TV (SSTV)
- Earth Geometry
- VK4ZQ - Amateur Radio with an Emphasis on Satellites, Portable and Microwaves
- Fox Delta Postion Control Box
- pstRotor.EXE by YO3DMU
Satellite Info Servers by WB4APR, Bob Bruninga:
r2cloud Tracking Software
Use r2cloud in conjunction with rotctrld from hamlib.
SatNOGS Rotator v3:
DOSS Remote Automatic Antenna Rotator with Remote Control
How to build a homebrewElevation system for Amateur Satellites:
ISS Slow Scan TV (SSTV)
VK4ZQ - Amateur Radio with an Emphasis on Satellites, Portable and Microwaves
Working Amateur Radio Satellites Portable - Posted on 14/07/2019:
Fox Delta Postion Control Box
Fox Delta supply Amateur Radio Projects & Kits. There are three versions of
their Satellite Antenna Tracking Interface.
Satellite Antenna Tracking Interface: ST2-RS232:
- ST2-RS232 Interface for Yaesu compatible Rotors
- ST2-0417 USB: PCB REV 0220
- ST2-RS485: For Homebrew Stepper Motor Rotors
ST2-RS485 Interface is developed for homebrew Stepper Motor based Antenna Rotators.
Project uses PIC16F876A and is intended to control two stepper motors by a simple hyper-terminal commands or standard Yeasu GS232 type instruction sets running on a PC software, such as SatPC32, Nova etc.
ST2-Rs485 requires a RS485 adapter at PC-side, which can be either a RS232 D9 type or an USB version using CH340 type chip.
Two independent timing circuits are used to control speed of two stepper motors, AZ and EL.
ST2-RS485 KIT PARTS LIST & SCHEMATICS - Controller for Stepper Motors:
pstRotor.EXE by YO3DMU
Windows based WXTrack:
SatNOGS is an integral part of the Libre Space Foundation. The project
aims to build a global network of satellite ground stations. It is designed as
an open source participatory project based on the users operating a ground station
hat is accessed via a web page for all of the network users.
Facebook - Amateur Radio Satellite Service:
Glenn Lyons VK4PK
Ver:gnl02032018 - pre published v0.9