HF 20W SSB/CW/AM 0.5-30MHz w/Antenna Tuner.
0.5-30MHz (10-160 metres on TX) with 20 watts of RF output.
Utilises a software defined (SDR) 24 bit at 48kHz sampling rate.
Review by QST Magazine:
https://xiegu.eu/wp-content/uploads/sites/4/2020/02/2020-03-QST-Product-Review-Xiegu-G90.pdf
Review:
https://radio.thulesius.se/sdr/xiegu-g90-transceiver/
eham Review:
https://www.eham.net/reviews/view-product?id=14255
Xiegu G90 Features High performance front end narrowband ESC preselector Frequency range of 0.5~30MHz, SSB/CW/AM 1.8 inch high brightness color TFT LCD screen ±24k bandwidth spectrum display with waterfall Software defined narrowband filter (CW mode: 300Hz) Detachable Front Panel/Display Unit Up to 20W of RF power Built-in wide range automatic antenna tuner I/Q output for interfacing with a PC or XDT1 panadapter Xiegu G90 Receiver Parameters RX frequency range: 0.5MHz to 30MHz Modes: SSB/CW/AM RX sensitivity: better than 0.25uV @12dB Sinad (PRE: ON) Machine dynamic range: 90dB Adjacent channel suppression: 60dB Audio output power: 0.5W@ 4Ω Standby current: 750mA @ Max Xiegu G90 Transmitter Parameters TX frequency range: all amateur bands 1.8 to 30 MHz Modes: SSB/CW/AM RF output power: 20W Spurious suppression: ≥50dB Carrier suppression: ≥50dB Sideband suppression: ≥50dB Transmit working current: 8A @ Max Xiegu G90 Antenna Tuner Parameters Initial tuning time: ≤12s Re-entry tuning time: ≤ 2s Xiegu G90 General Specifications Operating voltage range: 12 ~ 15V DC Operating temperature range: 0 ° C ~ 55 ° C Frequency stability: ±2ppm (after 30 minutes of power on) Size: 120*45*210 mm (without protrusions, head unit combination status) Weight: about 1kg
Xiegu GSOC is an advanced controller with panadapter for the G90 and X5105
transceivers.
It has a large high resolution touch screen and will extend the
features and functionality of your G90 and X5105 transceiver.
As at August 2020 this is Under development and no retail price has been set.
Source: https://xiegu.eu/product/gsoc/
[Top][Home]
X5105 General Specifications: Frequency coverage: 1,0-55MHz (TX in Ham Bands) Operating mode: USB, LSB, AM, FM Channel Memories: 100 Antenna Impedance: 50 Ohm Supply Voltage 13,8 VDC +/- 15% Current Consumption: RX 660mA or less, TX 2,5A or less Operating Temperature: -10C to +60C Frequency Stability: 2ppm in 60 min Dimensions: 160 x 100 x 46 mm Weight: 0,94 kg X5105 Receiver Specifications: Structure: Double Conversion Superheterodyne + Digital baseband processing IF Frequency: 70,455 MHz, 10,695 MHz Sensitivity SSB/CW/FM: 0,25 uV Sensitivity AM: 2 uV (10 uV ,5-1,79 MHz) SSB Selectivity: -6dB 2,4 kHz, 60dB 4,6 kHz CW Selectivity: -6dB 500 Hz, 60dB 2000 Hz AMSelectivity: -6dB 6 kHz, 60dB 25 kHz FM Selectivity: -6dB 12 kHz, 60dB 25 kHz Image Suppression:70dB IF Suppression: 60dB Audio Output: 0,6 Watt @ 4 Ohm 10% THD) X5105 Transmitter Specifications Output Power: >4,5 Watt SSB, >1,5 Watt AM Carrier SSB Modulation Type : balanced modulation AM Modulation Type : Low leve amplitude modulation FM Modulation Type: Variable reactance Spur Reduction: >45dB Carrier suppression: >40dB Sideband Spurious: >50dB SSB Frequency Response: 400-2800Hz (-6dB) FM Max Swing; +/- 5kHz External Mic Impedance: o,2-10k Antenna Tuner Storage Points: each 100kHz interval Antenna Tuning Time: > 10 seconds
Xiegu XPA125B is a small and lightweight 125 watt HF and 50 MHz solid state
linear power amplifier perfect for your QRP radio or low power SDR transceiver.
It has a built in automatic antenna tuner, automatic protection circuits and a
big and bright display for monitoring the amplifier status.
[Top][Home]