wsjt-x

Only a USB cable should be used to connect between your IC-7300 and a PC

usermod -a -G dialout $USER
dmesg -e
[Feb 9 16:12] usb 1-1: new full-speed USB device number 35 using xhci_hcd
[  +0.148568] usb 1-1: New USB device found, idVendor=0451, idProduct=2046, bcdDevice= 1.25
[  +0.000007] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  +0.000989] hub 1-1:1.0: USB hub found
[  +0.000109] hub 1-1:1.0: 4 ports detected
[  +0.286320] usb 1-1.1: new full-speed USB device number 36 using xhci_hcd
[  +0.102097] usb 1-1.1: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00
[  +0.000007] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  +0.000004] usb 1-1.1: Product: CP2102 USB to UART Bridge Controller
[  +0.000003] usb 1-1.1: Manufacturer: Silicon Labs
[  +0.000002] usb 1-1.1: SerialNumber: IC-7300 02008751
[  +0.001858] cp210x 1-1.1:1.0: cp210x converter detected
[  +0.001858] usb 1-1.1: cp210x converter now attached to ttyUSB0
[  +0.078151] usb 1-1.4: new full-speed USB device number 37 using xhci_hcd
[  +0.106652] usb 1-1.4: New USB device found, idVendor=08bb, idProduct=2901, bcdDevice= 1.00
[  +0.000002] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  +0.000001] usb 1-1.4: Product: USB Audio CODEC 
[  +0.000001] usb 1-1.4: Manufacturer: Burr-Brown from TI              
[  +0.010803] input: Burr-Brown from TI               USB Audio CODEC  as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.3/0003:08BB:2901.000F/input/input29
[  +0.058873] hid-generic 0003:08BB:2901.000F: input,hidraw3: USB HID v1.00 Device [Burr-Brown from TI               USB Audio CODEC ] on usb-0000:00:14.0-1.4/input3

Icom 7300 Radio Settings



[Top][Home]


References

WSJT-X FT8 and the Icom 7300 the Easy Way!:

https://www.fbnews.jp/201805/technical_en/

Operating in the FT8 mode with the IC-7300:
https://www.k0pir.us/icom-7300-wsjt-x-ft8-easy-way/

HOW TO CONFIGURE WSJT-X ON UBUNTU:
https://linuxer.eu/wsjt-x-ic-7300-ubuntu-configuration/



[Top][Home]


Glenn Lyons VK4PK
glenn@LyonsComputer.com.au
Ver:gnl2019mmdd - pre published v0.9