Cisco Switch

Contents:

Configuration
References

Configuration

BARC-CISCO
ssh admin@192.168.128.1

Original config (C) vk4ba@leighahall.com

***** This Service is for Authorised Clients Only *****
           *****      UNAUTHORIZED ACCESS IS PROHIBITED      *****

*****************************************************************************
* WARNING:      It is a criminal offence to:                                *
*               i.  Obtain access to data without authority                 *
*                         (Penalty 2 years imprisonment)                    *
*               ii. Damage, delete, alter or insert data without authority  *
*                         (Penalty 10 years imprisonment)                   *
*****************************************************************************

C897VAG-VK4RBA#
C897VAG-VK4RBA#?
Exec commands:
  <1-99>           Session number to resume
  access-enable    Create a temporary Access-List entry
  access-profile   Apply user-profile to interface
  access-template  Create a temporary Access-List entry
  archive          manage archive files
  audio-prompt     load ivr prompt
  auto             Exec level Automation
  beep             Blocks Extensible Exchange Protocol commands
  bfe              For manual emergency modes setting
  calendar         Manage the hardware calendar
  call             Voice call
  call-home        Call-Home commands
  ccm-manager      Call Manager Application exec commands
  cd               Change current directory
  cellular         cellular commands
  clear            Reset functions
  clock            Manage the system clock
  cns              CNS agents
  configure        Enter configuration mode
  connect          Open a terminal connection
  copy             Copy from one file to another
  credential       load the credential info from file system
  crypto           Encryption related commands.
  cts              Cisco Trusted Security Exec Commands
  debug            Debugging functions (see also 'undebug')
  delete           Delete a file
  dir              List files on a filesystem
  disable          Turn off privileged commands
  disconnect       Disconnect an existing network connection
  do-exec          Mode-independent "do-exec" prefix support
  dot1x            IEEE 802.1X Exec Commands
  eap              EAP Exec Commands
  emadmin          Extension Mobility Commands
  emm              Run a configured Menu System
  enable           Turn on privileged commands
  eou              EAPoUDP
  erase            Erase a filesystem
  ethernet         Ethernet parameters
  event            Event related commands
  exit             Exit from the EXEC
  file-acct        File mode accounting exec command
  flush            File mode accounting flush options
  format           Format a filesystem
  fsck             Fsck a filesystem
  help             Description of the interactive help system
  hunt-group       hunt group exec command
  if-mgr           IF-MGR operations
  ip               Exec commands for IP features
  ip               IP SLA Exec Command
  ips              Intrusion Prevention System
  isdn             Run an ISDN EXEC command on an ISDN interface
  license          License information
  lig              LISP Internet Groper
  lock             Lock the terminal
  logging          Handles logging operations
  login            Log in as a particular user
  logout           Exit from the EXEC
  mediatrace       Mediatrace Commands
  microcode        microcode commands
  mkdir            Create new directory
  monitor          Monitoring different system events
  more             Display the contents of a file
  mpls             MPLS commands
  mrinfo           Request neighbor and version information from a multicast router
  mstat            Show statistics after multiple multicast traceroutes
  mtrace           Trace reverse multicast path from destination to source
  name-connection  Name an existing network connection
  no               Disable debugging functions
  ntp              NTP Exec Commands
  onep             ONEP related commands
  pad              Open a X.29 PAD connection
  partition        Partition disk
  ping             Send echo messages
  pnpa             PnP agent
  ppp              Start IETF Point-to-Point Protocol (PPP)
  pwd              Display current working directory
  redundancy       Redundancy Facility (RF) exec commands
  release          Release a resource
  reload           Halt and perform a cold restart
  rename           Rename a file
  renew            Renew a resource
  restart          Restart Connection
  resume           Resume an active network connection
  rlogin           Open an rlogin connection
  rmdir            Remove existing directory
  routing-context  Routing Context
  rsh              Execute a remote command
  sdlc             Send SDLC test frames
  send             Send a message to other tty lines
  service-module   Service module
  set              Set system parameter (not config)
  setup            Run the SETUP command facility
  show             Show running system information
  slip             Start Serial-line IP (SLIP)
  software         Software commands
  spec-file        format spec file commands
  ssh              Open a secure shell client connection
  start-chat       Start a chat-script on a line
  systat           Display information about terminal lines
  tclquit          Quit Tool Command Language shell
  tclsh            Tool Command Language shell
  telnet           Open a telnet connection
  terminal         Set terminal line parameters
  test             Test subsystems, memory, and interfaces
  traceroute       Trace route to destination
  trm              Trend Registration Module
  tunnel           Open a tunnel connection
  undebug          Disable debugging functions (see also 'debug')
  upgrade          Upgrade commands
  verify           Verify a file
  vlan             Configure VLAN parameters
  voice            Voice Commands
  vtp              Configure global VTP state
  waas             IOS Wide Area Application Services
  webvpn           WebVPN exec command
  where            List active connections
  write            Write running configuration to memory, network, or terminal
  x28              Become an X.28 PAD
  x3               Set X.3 parameters on PAD
  xconnect         Xconnect EXEC commands

show interface status

Port    Name               Status       Vlan       Duplex Speed Type
Gi0                        disabled     1            auto    auto 10/100BaseTX/1000BaseT
Gi1                        disabled     1            auto    auto 10/100BaseTX/1000BaseT
Gi2                        disabled     1            auto    auto 10/100BaseTX/1000BaseT
Gi3     CAP3502I           connected    1          a-full  a-1000 10/100BaseTX/1000BaseT
Gi4     echolink-pi-70cm   disabled     1            auto    auto 10/100BaseTX/1000BaseT
Gi5     DMR-pi             disabled     1            auto    auto 10/100BaseTX/1000BaseT
Gi6     HP-Procurve-J9450A connected    1          a-full  a-1000 10/100BaseTX/1000BaseT
Gi7                        disabled     1            auto    auto 10/100BaseTX/1000BaseT
C897VAG-VK4RBA#enable
C897VAG-VK4RBA#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
C897VAG-VK4RBA(config)#interface Gi5
C897VAG-VK4RBA(config-if)#

enable
configure Terminal
interface Gi5
! Configure static NAT for port 80 redirection to port 84 public
ip nat inside source static tcp 192.168.128.23 vk4rba.ddns.net 84 extendable

[Top][Home]

References

Basic Cisco Router Configuration Step-By-Step Commands:
https://www.networkstraining.com/basic-cisco-router-configuration-steps/

Basic Router Configuration:
https://www.cisco.com/en/US/docs/routers/access/800/850/software/configuration/guide/routconf.pdf

IP Multicast: MVPN Configuration Guide:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_mvpn/configuration/xe-16/imc-mvpn-xe-16-book/imc-cfg-mc-vpn.html#GUID-C31E4C0A-2A43-4D63-92B7-F132C5B9916F

[Top][Home]

Glenn Lyons VK4PK
glenn@LyonsComputer.com.au
Ver:gnl2023003030 - pre published v0.9