Raspberry Pi Zero W

Image
Image

The Raspberry Pi Zero W (W for wireless) is a new variant of the Raspberry Pi Zero
with wireless LAN and Bluetooth.

For initial setup a keyboard via an OTG adaptor can be used with the USB-micro port.

Further information is available here: https://raspberry.piaustralia.com.au/raspberry-pi-zero-w

The specs for the Raspberry Pi Zero W are as follows:

[Top][Home]


Pi Zero Status LED

Pi Zero Status LED
Image
https://www.raspberrypi-spy.co.uk/2013/02/raspberry-pi-status-leds-explained/

The Pi Zero only has a single activity status LED. There is no power LED. On both the Zero and Zero W the Activity LED is on GPIO Pin 47, the same as the A+/B+/2B but different to the original A and B models (which are on GPIO pin 16). The only other difference for the Zero/ZeroW is that you clear the pin to turn the LED on (and set the pin to turn the LED off) which is opposite to the A+/B+/2B.



[Top][Home]


References

SPARKFUN - Getting Started with the Raspberry Pi Zero Wireless
https://learn.sparkfun.com/tutorials/getting-started-with-the-raspberry-pi-zero-wireless/all

[Top][Home]


Glenn Lyons VK4PK
glenn@LyonsComputer.com.au
Ver:gnl14102018 - pre published v0.9