Toroids
Contents:
- T200-2.png
- T200-6 Toroid Yellow 50.8mm
- FT114-43 Ferrite Toroid (Fair-Rite 5943001001)
- FT240-43
- Electus - LO1238 L15 35x21x13mm Toroid
[Top][Home]
T200-2.png
Source:
https://toroids.info/T200-2.php
Used in the VK6YSF Choking Balun:
See:
http://www.vk6ysf.com/balun_choke_v1.htm
[Top][Home]
T200-6 Toroid Yellow 50.8mm
Source:http://toroids.info/T200-6.php
[Top][Home]
FT114-43 Ferrite Toroid (Fair-Rite 5943001001)
Source:
https://toroids.info/FT114-43.php
Fair-Rite 5943001001 MnZn Ferrite Toroid, 43 material, for EMI suppression between
20 and 250MHz, and wideband transformers up to 50MHz.
These are ideal for use as noise or common mode suppressors on cables to reduce
interference on the HF bands, or constructing baluns.
Size: Diameter 28.85mm, Height 7.5mm Hole Size 19mm, color Grey, (initial permability) ui=800.
https://www.fair-rite.com/product/toroids-5943003801/
[Top][Home]
FT240-43
Source:
https://toroids.info/FT240-43.php
VK6YSF - Choking balun for HF and upper MF bands. (1.5MHz - 30MHz).:
https://vk6ysf.com/balun_choke_balun_hf.htm
[Top][Home]
Electus - LO1238 L15 35x21x13mm Toroid
Toroid (both ferrite and powdered iron) are commonly used as cores for transformers
or chokes mainly for RF suppression but also for any application where a compact
reactive component is needed.
MATERIAL L15 SIZE A35 X B21 X C13
Practical Frequency: 0.1 to 2 Mhz
[Top][Home]
Glenn Lyons VK4PK
glenn@LyonsComputer.com.au
Ver:gnl20220110 - pre published v0.9